ELECOM CO., LTD. You can use it by extending it as much as you need! New release of reel-type drum-type LAN cable with a maximum length of 30m, compatible with 10 Gigabit high-speed transfer that conforms to Cat6A

You can use it by stretching it as much as you need! New release of reel-type drum-type LAN cable with a maximum length of 30m, compatible with 10 Gigabit high-speed transfer that conforms to Cat6A
Rollable drum type that can be stretched to the required length
ELECOM CO., LTD. (Headquarters: Chuo-ku, Osaka, President: Yukio Shibata) will release a reel-type LAN cable “LD-GPAD/BK30” that conforms to Cat6A and can be freely extended up to 30m from the end of May. increase.
[Image 1: https://prtimes.jp/i/26881/564/resize/d26881-564-daa2ea40d48673c9dccd-0.jpg&s3=26881-564-27aa070c6d94d219cc0636252ed2f36d-1100×500.jpg] This product is a long type LAN cable that conforms to Cat6A. The maximum length is 30m, and it is a rollable drum type that can be stretched to the required length. It supports environments such as 1000BASE-TX/1000BASE-T/100BASE-T, including 10 Gigabit Ethernet “10GBASE-T”. Twisted pair cables and cruciform materials are used to reduce the effects of noise and signal interference, enabling high-speed and stable data transfer.
Since the cable can be stretched to the required length, it is difficult for the cables to get tangled, and when not needed, it can be rolled up neatly on the drum and stored compactly. increase. A protective cap is attached to the plug side and a protective shutter is provided to the jack side to reduce troubles caused by damage to the connector part and dust intrusion.
It also comes with an easy-to-carry grip and an easy-to-wind handle, so please take advantage of this product that can be easily installed at the appropriate length when needed.
Supports 10 Gigabit “10GBASE-T”! Cat6A compliant rewind drum type LAN cable that can be extended up to about 30m
Cat6A compliant LAN cable wind-up drum type compatible with 10 Gigabit Ethernet “10GBASE-T”, which is ideal for high-speed optical
Ensures stable data transfer speed in 1000BASE-TX/1000BASE-T/100BASE-T environment.
It supports high-frequency bands up to 500MHz, which is twice that of Cat6, and is resistant to noise interference, realizing a high-speed and stable network environment.
The single wire twisted pair specification is less susceptible to noise and achieves a more stable network environment.
Regardless of the connection direction, connection can be used from both the plug side and the jack side.
Network connection is not possible with this product alone. Please prepare Cat6A cable made by our company separately. Also, make sure that the length of the LAN cable to be connected is 50 m or less.
[Image 2: https://prtimes.jp/i/26881/564/resize/d26881-564-b5bd4d9096fb0fa4f9c6-1.jpg&s3=26881-564-17dc0311608ce940b607360fbe8f6ceb-800×760.jpg]
[Image 3: https://prtimes.jp/i/26881/564/resize/d26881-564-6489b739742844f7c0b4-2.jpg&s3=26881-564-4794a8842d4219e38bd6d875dfe79369-1495×467.jpg] ▲ LAN cable can be freely extended up to 30m. Can be extended from the drum as long as needed
▲ The placement of the drum can be selected according to the surrounding conditions.
[Image 4: https://prtimes.jp/i/26881/564/resize/d26881-564-d0fbbf6f629b853b791c-3.jpg&s3=26881-564-b852130ec0f2b0ac7ecfb059054040f7-1170×585.jpg] ▲ Product image The end of the cable has an RJ-45 connector
▲ Equipped with RJ-45 jack on one side. Can be connected to a device using a commercially available LAN cable
Because it is a winding type, it can be wired neatly according to the site! Since the cable can be rolled up and stored, it is not bulky and can be used for temporary installations such as meetings and events, as well as temporary installations in emergencies.
Cables can be pulled out and routed to the required length, preventing cables from tangling or being scattered on the floor.
By inserting a cross-shaped material in the cable, it prevents signal interference and realizes stable data transfer.
A protective cap is attached to the plug side, and a protective shutter is mounted on the jack side. Prevents problems caused by broken connector tabs, damage to connector tips, and the intrusion of dust during transportation and installation.
[Image 5: https://prtimes.jp/i/26881/564/resize/d26881-564-81d3993f947ff0321454-4.jpg&s3=26881-564-2ccb9a5f77a6109c37d64109e5534252-1885×629.jpg] ▲ Pull out only the necessary amount and wire neatly
▲ Comes with a grip for easy carrying
▲ Comes with a handle that can be rolled up smoothly
[Image 6: https://prtimes.jp/i/26881/564/resize/d26881-564-7df89ba47ac11f1f4bfa-5.jpg&s3=26881-564-7e482b8f2f673742734d9928e283e91e-800×500.jpg] ▲ Transmission performance is not impaired even if the excess length of the cable is wound around the drum during use.
[Image 7: https://prtimes.jp/i/26881/564/resize/d26881-564-878b2b5d50b89339742a-6.jpg&s3=26881-564-60ad30bf5ddaa212314a7a25b77a9b6a-800×500.jpg] ▲ A protective cap is provided on the cable side, and a protective shutter is provided on the RJ-45 jack side.
Eco-friendly “THINK ECOLOGY” certified product
Products that meet one or more of our company’s environmental certification standards and display the “THINK ECOLOGY” mark. It is a product that works on environmental conservation and the packaging container of the product consists only of paper, cardboard, and plastic bag.

Main specifications
Standard: Cat6A compliant (compatible with
Transmission speed: 10Gbps
Interface: RJ-45 connector
Cable length: about 30m (not including connector), cable diameter: about 6.2mm Weight: about 2.8kg
Cable specifications: straight connection/single wire
(23AWG)/8-core/twisted pair cable
Outer sheath (coating) material: PVC
Product details
-Length up to 30m roll-up drum type LAN cable-
Model number: LD-GPAD/BK30
Price: ¥43,780 (standard price) ¥39,800 (excluding tax)
URL: https://www.elecom.co.jp/products/LD-GPADBK30.html
[Image 9: https://prtimes.jp/i/26881/564/resize/d26881-564-63dcc9457412aeedd774-8.jpg&s3=26881-564-a2b3d7c1a64782f992b3c0d01c21d03a-200×200.jpg] For details, please visit our website from the URL below.
Corporate information
ELECOM CO., LTD. develops, manufactures and sells IT peripheral products. In recent years, in addition to digital fields such as personal computers and smartphones, we have expanded into various fields such as healthcare, medical care, broadcasting, and social infrastructure, bringing unprecedented comfort and convenience to “life” and “society.” We are delivering. We provide new products and business solutions that serve as a bridge between innovations brought about by new technologies and users.
Company Profile
Company name: Elecom Co., Ltd.
Head office location: 9F LA Tower, 4-1-1 Fushimi-cho, Chuo-ku, Osaka Established: May 1986
Representative: Yukio Shibata, President
Details about this release:


%d bloggers like this: