[Pudu Robotics] PUDU launches a new mobile water tank exclusively for the 4-in-1 cleaning robot “CC1”
*Pudu Robotics*
Press release: July 18, 2024
**
PUDU launches a new mobile water tank exclusively for the 4-in-1 cleaning robot “CC1”
*Industry’s first* Just-place robot accessory that integrates water supply, drainage, and charging functions; “CC1” can be easily introduced in facilities where it is difficult to secure waterways or power supply*
Pudu Robotics, a global leader in commercial service robots
(Headquarters: Shenzhen, China, Japanese corporation Pudu Robotics Japan)
Co., Ltd
President and CEO: Zhang Tao (hereinafter referred to as PUDU) will launch a new mobile water tank as an auxiliary device for the commercial cleaning robot “CC1” that combines four functions of sweeping, floor cleaning, suction, and dry wiping into one unit. . This product consists of a desk lamp and a water tank, and enables water supply, drainage, and charging of “CC1” just by installing it in the facility. It goes on sale from today, July 18th.
The commercial cleaning robot “CC1″ has been highly praised for its cleaning ability, ability to avoid obstacles, warm and cute design, and ease of setup and operation, and has been introduced at many facilities since it went on sale in July last year. . We have a total of over 200 installations in restaurants, hotels, leisure facilities, factories, buildings, supermarkets, hospitals, nursing care
facilities, etc.
Facilities that have actually installed the system say, “The floor cleaning that used to take 5 people 2 hours to clean can now be completed unattended in 20 minutes” and “The cleaning power and suction power is very strong, and the robot “I was surprised because the sewage inside was unusual.”
“CC1” has a proven track record of being introduced in many different facilities, but there are some issues with its introduction. To use CC1, you need an area that can provide water supply and drainage equipment and power supply at the same time, and that is wide enough for the robot to pass (approx. 1m or more). However, some of the facilities considering introducing the system were unable to secure an area that met these requirements, and there were also many requests that they did not want to incur the cost of renovation work to secure the area. To address these on-site issues, CC1’s auxiliary equipment and mobile water tank can secure an area for water supply, drainage, and charging just by placing it, eliminating the need for on-site renovation work. By making it easier to introduce “CC1” into facilities, PUDU aims to further expand its introduction and provide solutions that reduce the burden and save labor in cleaning
operations.
*First in the industry: As of June 30, 2024, according to our own research
* ■Examples of challenges in introducing “CC1”*
1. There is water supply and drainage equipment, but there is no power supply. 2. No water supply and drainage facilities
3. There is water supply and drainage equipment and power supply, but the width is insufficient.
* ■ Illustrated image of how to use a mobile water tank *
The main features of mobile water tanks are:
* ● “CC1” can be used by simply placing it in the facility without renovating the existing equipment *
Just by installing it, you can supply, drain and charge CC1, so there is no need to modify existing equipment. You can reduce the cost of introducing “CC1”.
* ●Doubling the tank capacity*
Equipped with a 30 liter fresh water tank and a sewage tank, “CC1” can be supplied and drained twice. This can meet the daily cleaning needs of most facilities. With manual water changes, CC1 can continue cleaning 24 hours a day without interruption.
* Convenient water change reminder function*
If the tank is low on fresh water or full of waste water, you will receive a notification on your mobile app. A notification will also be displayed on the CC1 monitor, reminding users to change the water in the tank. High-performance monitoring functions prevent cleaning interruptions.
* ●Easy to use design*
Equipped with an ergonomic telescoping handle and four universal wheels for smooth movement and operation. It can be pushed or pulled freely and can handle slopes and steps. In addition, water exchange work can be done efficiently and in a short time.
* ■ Product overview of mobile water tank *
Body dimensions Desk lamp: 262(L) x 230(W) x 787mm(H) 10.32(L) x 9.06(W) x 30.98(H) in
Aquarium: 480(L)×470(W)×740(H)mm 18.90(L)×18.50(W)×29.13(H)in Body weight Desk lamp: 8kg
Water tank: 20kg
Water tank capacity Fresh water tank 30L (twice the tank capacity of the CC1 main unit)
Sewage tank 30L (twice the tank capacity of CC1 main unit)
Working environment Temperature: 0-40℃
Humidity: ≤90%RH (40℃)
Installation environment Temperature: -20-60℃
Humidity: ≤90%RH (40℃)
* ■About the commercial cleaning robot “CC1”*
“PUDU CC1” is an intelligent commercial cleaning robot with four functions in one. A variety of functions such as sweeping, floor cleaning, suction, and dry wiping are consolidated into one unit.
– Suitable for indoor floors of various materials and hardness. – Even if the power drops during cleaning, the robot remembers the cleaning progress and can resume from the last position after being fully charged.
– Automatic water supply and drainage and automatic charging are possible at a dedicated workstation.
– Equipped with a multi-fusion sensor, it can immediately stop and move away from obstacles no matter what angle it encounters. – Collect and summarize the working status of each unit and automatically generate cleaning reports.
Body dimensions 663(L)×626(W)×667(H)mm
Body weight 75kg
Scrubbing width 50cm
Sweeping width 40cm
Water tank capacity Fresh water tank 15L
Sewage tank 15L
Duration Scrub 3-4 hours
Sweep + Vacuum 4-5 hours
Mop 8 hours
Charging time 3 hours
Cleaning efficiency 700~1000m²/h
Noise level less than 70dB
Traveling speed 0.2-1.2m per second
tablet 10.1 inch
Navigation Method Vision & Laser
https://www.pudurobotics.com/jp/products/puduCC1
* ■About Pudu Robotics*
Pudu Robotics is a global manufacturer of the design, research and development, production and sales of commercial service robots, with approximately 80,000
We are shipping several robots. Our robots are currently used in a wide range of industries including restaurants, retail, hospitality, healthcare, entertainment, and manufacturing. We also focus on research and development, manufacturing, and sales, and have a wide range of core technologies and approximately 1,000 certified patents. Founded in 2016 and headquartered in Shenzhen, China, our mission is to use robots to improve the efficiency of human production and life. For more information on business developments and updates, please visit PUDU’s official Facebook page
, YouTube, LinkedIn, X (formerly Twitter), and Instagram.
・Facebook: https://www.facebook.com/PuduRobotics.cn/
・YouTube: https://www.youtube.com/c/PuduRobotics
・LinkedIn: https://www.linkedin.com/company/pudurobotics/
・X (old Twitter): https://twitter.com/PuduRobotics
・Instagram: https://www.instagram.com/pudurobotics_official/?hl=ja